Updated 3/10/2023
If you need an impressively accurate miter saw, then the heavy-duty DEWALT DWS715 will deliver.
The DWS715 is a single-bevel compound miter saw that is equipped with an accurate miter system.
This compound miter saw also features a revolutionary machined base fence that provides additional support to ensure that the fence remains straight for a considerably long time.
A 15 Amp motor powers this compound miter saw, including its 12-inch carbide blade capable of spinning at 4000 RPM.
Reading this DEWALT DWS715 review will hopefully convince you that this miter saw is ideal for making furniture-quality cuts.
Disclosure: This post contains affiliate links, which means the site receives a small commission for all purchases.
DEWALT DWS715 Miter Saw Features
- Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
- The mitre saw features the precise miter system and machined base fence support
- Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
- Bevels 0 degree – 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
- 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree
Powerful Motor
The DEWALT DWS715 can cut framing and molding quite effortlessly, and can also be used for bevel cutting, crosscutting, and miter-cutting, all thanks to its 15 Amp dependable and powerful motor.
This enables the blade to operate at 4,000 RPM of no-load speed.
The DEWALT DWS715’s saw blade is attached to an automatic electric brake, so it does not take more than 5 seconds to stop once the trigger has been released.
Concerning dimensional lumber, this powerful motor also gives this saw a 2×8 inch crosscut capacity.
Accurate Miter System & Tail Side Fence
A wide miter capacity between 0 and 50 degrees to the left and right is featured by the accurate miter system of this saw.
The stainless steel dent plate of the miter system also has 11 positive stops, as a result of which this saw can be set up quite easily, and productivity is also improved.
The sliding fence is also quite tall. Up to 5-1/4 inch of crown molding and 6-1/2 inch of base molding can be nested vertically against it.
When bevel cuts need to be made, the fence can also be easily moved out of the way by sliding it out.
A good miter saw stand would guarantee this saw’s stability.
Cam-Lock & Bevel Capability With Bevel Stops
The cam-lock miter handle of this saw can be easily adjusted. As a result, the cutting angles are always precise and rapid, and dent override is made possible, i.e., the saw does not slip into the miter detent when the miter setting is being adjusted.
Due to this saw’s left and right bevel capacity, its cutting capacity is increased.
To the left, bevel cuts can be made between 0 and 48 degrees; to the right, bevel cuts can be made between 0 and 3 degrees.
Another feature that makes this compound miter saw quite versatile is its four hardened steel bevel stops, which range from 0 to 48 degrees.
As a result, the most common bevel angles can be set very conveniently and rapidly.
Blade Guard & Interlocking Trigger
It can be dangerous to work with a power tool, which is especially true in the case of saws due to their extremely sharp spinning blades.
Of course, DEWALT has considered this, which is why the DEWALT DWS715 is equipped with a blade guard that keeps the blade covered.
When the arm is lowered to cut the material, the guard moves up and out of the way, and as soon as the arm is lifted up, the guard resumes its position.
The interlocking trigger also ensures that the saw does not accidentally start up.
DEWALT DWS715 Dimensions & Weight
The DEWALT DWS715 compound miter saw is lightweight, weighing only 42 pounds.
It is also equipped with an inbuilt carry handle, so it can be easily lifted and moved around where you intend to use it.
The DEWALT DWS715 saw can also be easily stowed away, considering that its dimensions are 27.7 inches x 20 inches x 18.8 inches, which means that it is not too large.
What We Like
- This compound miter saw will cut effortlessly and silently.
- The miter scale is easy to read even.
- This saw will cut through wood rapidly thanks to its 32 tooth blade.
What We Don’t Like
- The dust bag is smaller than most, so its contents must be dumped frequently.
Frequently Asked Questions (FAQ)
Can the DEWALT DWS715 be used to cut 4×4 wood?
This saw can effortlessly cut 4x4s. In fact, it can even cut 6x6s, although not in one go, i.e., they will have to turn over after the first cut.
Does the DEWALT DWS715 make straight cuts?
If the blade’s alignment hasn’t shifted during shipping and it is still 90 degrees to the bed, this saw will make straight cuts. Of course, this angle can be easily adjusted
What blade comes with the DEWALT DWS715?
The DEWALT DWS715 comes with a 12-inch blade. The blade is made of high-speed steel and is designed for use with the DEWALT DWS715 miter saw. The blade has a thin kerf and is designed for use with crosscutting and rip cuts. The blade has a 60-tooth configuration and a 5/8-inch arbor. The blade can be used with wood or composite materials.
How do you tighten a DEWALT miter saw blade?
First, to tighten a DEWALT miter saw blade, ensure the saw is unplugged. Then, open the motor cover and locate the arbor nut. Using a wrench, turn the nut clockwise until it is tight. Next, close the motor cover and plug in the saw. Finally, turn on the saw and let it run for a few seconds to ensure the blade is secure. If the blade is still loose, repeat the process until it is tight.
The Verdict
Overall, this model is one of the finest miter saws, built to be used under rugged conditions, and capable of handling many tasks, which has probably become apparent after reading this DEWALT DWS715 review.
The accurate cutting angles, the ease of use, and the numerous blade stop definitely reinforce DEWALT’s dedication to quality tools. Just make sure you purchase a genuine one instead of a fake DEWALT tool.
Whether you casually like to do DIY projects or you are a professional contractor, this compound miter saw is highly recommended for bevel and miter cutting!
Check Hardware World Price